1937 Plymouth: I installed the rear seat and armrests for fit check then stripped the material and stuffing from the frames and took them for sandblast and powder coat. I removed the mounting brackets from the armrests and fabricated new ones from plywood.

This blog is a record of how I built my 1937 Plymouth two door sedan into a prize winning restomod. Restomod (restoration + modern technology) uses the advancements in automotive technology to enhance the performance, comfort and safety of a classic car. Follow along as I post photos and information over the next several weeks about how I modified and fabricated various components to bring this awesome project together. I will also share several upgrades I performed after the car was completed.

Tuesday, July 21, 2015

I installed the rear seat and armrests for fit check then stripped the material and stuffing from the frames and took them for sandblast and powder coat. I removed the mounting brackets from the armrests and fabricated new ones from plywood.

Tuesday, July 21, 2015

I installed the rear seat and armrests for fit check then stripped the material and stuffing from the frames and took them for sandblast and powder coat. I removed the mounting brackets from the armrests and fabricated new ones from plywood.

No comments:

Post a Comment