1937 Plymouth: I fabricated a new glove box from sheetmetal. I made the back of the box removable so I could access the air conditioner/heater connections and valves for future maintenance and/or repair. I also installed a 1965 Pontiac courtesy light (not shown in these photos) in the top of the box.

This blog is a record of how I built my 1937 Plymouth two door sedan into a prize winning restomod. Restomod (restoration + modern technology) uses the advancements in automotive technology to enhance the performance, comfort and safety of a classic car. Follow along as I post photos and information over the next several weeks about how I modified and fabricated various components to bring this awesome project together. I will also share several upgrades I performed after the car was completed.

Friday, July 31, 2015

I fabricated a new glove box from sheetmetal. I made the back of the box removable so I could access the air conditioner/heater connections and valves for future maintenance and/or repair. I also installed a 1965 Pontiac courtesy light (not shown in these photos) in the top of the box.

Friday, July 31, 2015

I fabricated a new glove box from sheetmetal. I made the back of the box removable so I could access the air conditioner/heater connections and valves for future maintenance and/or repair. I also installed a 1965 Pontiac courtesy light (not shown in these photos) in the top of the box.

No comments:

Post a Comment